Mechanical Engineering

Note: See beginning of Section H for abbreviations, course numbers and coding.

All courses must be passed with a grade of C or better. All pre- and co-requisites are strictly enforced. 

L* = Laboratory periods on alternate weeks. 
T*= Tutorial periods on alternate weeks.
* = Engineering electives. Not all offered every year. Consult Department as to availability of courses from year to year at web site: http://www.me.unb.ca.

ME1312Computer Aided Design4 ch (2C 3L)

Introduces the technology of 3D parametric geometric modeling to design and model mechanical engineering parts, assemblies and devices. Geometric variables and their interrelationships will be covered by projects involving the design of mechanical components, assemblies and machines to meet functional requirements. Manufacturing requirements including Geometric Dimensioning and Tolerancing. The use of the model for analysis, optimization and simulation will be stressed. Presentation of the model through engineering drawings and pictorial renderings. Animation of mechanisms. A comprehensive commercial CAD program will be utilized.

Prerequisite: ENGG 1003

Co-requisite: MATH 1503

ME2003Dynamics for Engineers4 ch (3C 2L 1T)

The dynamic analysis of linear particle systems based on momentum. The analysis of centroids and moments of inertia for rigid bodies. Introduction to the rotation of a rigid body about a fixed axis, motion of a rigid body in a plane. The dynamic analysis of a rigid body with general planar motion using Newton’s second law, work and energy, momentum and angular momentum. 

Prerequisite: ENGG 1082, MATH 1013

Co-requisite: MATH 1503 , or MATH 2213 , or equivalent. 

ME2111Mechanics of Materials I3 ch (3C 1T)

Basic concepts, uniaxial stress and strain, Hooke’s law, torsion, pure bending, bending design, shear flow, transverse loads, stress and strain transformation, Mohr’s circle, strain measurement. 

Co-requisite: ME 2003 or APSC 1023. 

ME2122Mechanics of Materials II3 ch (3C 2T*)

Fatigue, yield criteria, thin-wall pressure vessels, strength and deflection of beams, buckling of columns, instability, indeterminate beams, energy methods, Castigliano’s theorem. 

Prerequisite: ME 2111 or ME 2121 or CE 2023

ME2125Mechanics of Materials Design Project1 ch (2L*) [W]

Analysis of the strength of a mechanical device. Shapes and materials will be modified to meet deflection and stress limits. Written reports will document choices made and assessment of design. Group oral reports. 

Prerequisite: ME 2111 or ME 2121 or CE 2023

Co-requisite: ME 2122

ME2143Kinematics and Dynamics of Machines3 ch (3C 2T*)

Fundamental concepts of linkages; displacement, velocity and acceleration analysis using graphical and analytical methods. Static and dynamic force analysis of linkages. Design of cams, gears and gear trains; including ordinary and planetary gear trains. Balancing rotating masses. Simple gyroscopic effects. 

Prerequisite: ME 2003 or APSC 1023 . Recommended: CS 1003 or other introductory programming course. 

ME2145Kinematics and Dynamics Design Project1 ch (2L*) [W]

Student groups to design and build working model of planar linkage mechanism, based on a mechanical application. Cooperation and project management skills. Written reports to document choices made; evaluation of working model performance; and position, velocity, acceleration and force analyses. Group oral reports.

Prerequisite: ME 2003 , APSC 1023 . 

Co-requisite: ME 2143 . Recommended co-requisite: ME 2352 or ME 3352 . 

ME2352Design Optimization4 ch (3C 2L)

Optimization of any design is essential either to remain competitive or to improve product efficiency and quality. Several optimization methods are presented through a variety of mechanical design and industrial engineering problems. Topics include: single and multi-variable unconstrained optimization, linear programming, transportation, assignment and network problems. Other topics such as constrained and global optimization are introduced.

Prerequisites: CS 1003 and MATH 2513

Recommended co-requisite: ME 2143.
ME3232Engineering Economics3 ch (3C)

Application of engineering economic analysis to mechanical and industrial engineering systems. Major emphasis will be given to decision-making based on the comparison of worth of alternative courses of action with respect to their costs. Topics include: discounted cash flow mechanics, economic analyses, management of money, economic decisions. Restricted to students with at least 60 ch.

ME3341Machine Design3 ch (3C 2T*)

Review of design process. Safety, environmental and sustainability issues of machine design. Design of shafts, power screws, threaded fasteners. Tolerances and fits. Contact stresses. Lubrication, journal bearings and rolling element bearings. Gearing design: spur, helical, bevel and worm gearing. Critical speeds of rotating systems. Couplings, seals. 

Prerequisite: ME 2143 and ME 2122 . Recommended: ( STAT 2593 or STAT 2264 ). 

ME3345Machine Design Project 2 ch (4L*) [W]

Applies many topics of first 2 years in mechanical engineering. Practical aspects of detailed machine design project in team environment. Student groups to design, build and test a mechanical device for a client. Written reports will document choices made and assessment of design. Group oral reports. 

Prerequisite: ME 1312 , ME 2122 , ME 2145

Co-requisite: ME 3341

ME3433Heat Transfer I3 ch (3C 1T)

Conduction: One-dimensional steady conduction and applications. Thermal properties. The differential equations of conduction; analytic and numerical solutions to two-dimensional problems and applications. Unsteady conduction lumped and differential approaches with applications. Temperature measurement. Convection: Dynamic similarity and dimensional analysis; boundary layer theory and applications to flow over heated/cooled surfaces; laminar and turbulent flow-free convection. Heat transfer with change of phase. Radiation: the laws of black body radiation; Kirchhoff's law and gray body radiation. Combined modes of heat transfer: heat exchanger design; augmentation of heat transfer; fins and thermocouples. Environmental heat exchange. Equivalent to CHE 3304

Prerequisite:(ME 2413 or ME 3413 ), (ME 2415 or ME 3415), (ME 3511 or ME 3513). 

ME3435Heat Transfer I Laboratory1 ch (3L*) [W]

Laboratory experiments and measurements related to Heat Transfer I. Laboratory reports and readings are assigned. 

Prerequisites: (ME 2415 or ME 3415) and ME 3515) or CHE 2412

Co-requisite: ME 3433 or CHE 3304

ME3511Fluid Mechanics3 ch (3C)

The principles of fluid mechanics are introduced and methods are presented for the analysis of fluid motion in practical engineering problems. Specific topics include: fluid statics; integral balances of mass, momentum, angular momentum and energy; boundary layer theory and introduction to the Navier-Stokes equations; dimensional analysis; and liquid flow in piping networks with pumps and turbines. Pressure and flow measurement and experimental uncertainty.

Prerequisite: ME 2003 or APSC 1023 .

Co-requisite: MATH 2513

ME3515Fluid Mechanics Laboratory1 ch (3L*) [W]

Laboratory experiments and measurements related to Fluid Mechanics I. Laboratory reports and readings are assigned.

Co-requisite: ME 3511

ME3522Applied Fluid Mechanics2 ch (2C 1T)

The performance and selection of hydraulic pumps and turbines, the lift and drag on immersed objects, and compressible flow in piping and nozzles. 

Prerequisites: (ME 2413 or ME 3413), ( ME 3511 or ME 3513 ), ME 3515

ME3524Fluid Systems and Design2 ch (1C 1L) [W]

Students work in groups on design projects that apply fluid mechanics. Examples include: pump and turbine selection; piping for conveyance of gases and liquids; gas and steam nozzles; lift and drag on air and water craft, land vehicles and projectiles; fluid forces on solid structures.

Prerequisites: (ME 2413 or ME 3413), (ME 3511 or ME 3513), ME 3515.

Co-requisite: ME 3522

ME3613System Dynamics4 ch (3C 1L* 1T)

System concepts. Development and analysis of differential equation models for mechanical, electrical, thermal, and fluid systems, including some sensors. Systems are primarily analyzed using Laplace transforms and computer simulation methods. Analysis concepts cover first, second, and higher order differential equations, transient characteristics, transfer functions, stability, dominance, and frequency response. Properties of systems: time constant, natural and damped frequency, damping ratio. 

Prerequisites: APSC 1023 , ( CS 1003 or CS 1073 ), ( ECE 1013 or ECE 1813 or EE 1013 or EE1813 ), MATH 3503 . Recommended: ECE 2701 or EE 2701 . 

ME3623Automatic Controls I4 ch (3C 1L* 1T)

Philosophy of automatic control; open loop, sensitivity, components of a control loop; closed loop control, error analysis. Design of P, I, PI, and PID-controllers based on closed-loop specifications. Stability criteria: Routh-Hurwitz. Lead/lag controller design using Root Locus and Bode diagrams. Sensor frequency response to classical inputs. Application of electronics and sensors to control systems based on frequency response. Basic digital analysis including digitization, sampling, aliasing, A/D and D/A devices, and phase loss due to time delays. 

Prerequisite: ME 3613

ME4173*Robot Kinematics4 ch (3C 2L*2T*)

Structure and specification of robotic manipulators. Homogeneous transformations and link descriptions. Manipulator forward and inverse displacement solutions. Jacobians in the velocity and static force domains. Singular configurations and workspace analysis. An introduction to trajectory planning and manipulator dynamics. Lab experiments explore several robotic manipulators. 

Prerequisites: MATH 2513 and ME 2143.

ME4243*Advanced Manufacturing Methods4 ch (3C 3L*)

An advanced course in methods of manufacturing engineering materials. Technical and theoretical bases of manufacturing methods. Material behaviour during processing. Computer simulation. High speed forming; sheet metal forming; forming limit diagrams.

Prerequisites: ME 2122 , ME 4283

ME4283Manufacturing Engineering II4 ch (3C 3L*)

Principles and physical phenomena of the basic manufacturing processes. A review of the attributes of manufactured products will precede lectures on forging, sheet metal working, machining and joining. Material behaviour during manufacturing. Processing of polymers, particulate metals and ceramics is presented. Design of manufacturing systems and the design of components based on criteria and constraints of manufacturing systems and equipment is included in each topic area of the course. A combination of lectures and experimental labs round out the course content. 

Prerequisites: (ME 2121 or ME 2122) and (ME 2222 or ME 3222). 

ME4421Applied Thermodynamics2 ch (2C 1T)

Air standard cycles: Open and closed gas turbine cycles with reheat, regenerative heat exchange and pressure drop. Steam power plants: analysis of vapor power systems, Rankine cycle, reheat and regenerative cycles; binary and nuclear plant cycles, power plant performance parameters, exergy accounting of a vapor power plant. Basic analysis of combined cycle power plants. Refrigeration systems. Properties of gas and vapor mixtures, psychometric principles, air-conditioning processes. Combustion: fuels, chemical equations, experimental analysis and the products of combustion.

Prerequisites: (ME 2413 or ME 3413), (ME 2415 or ME 3415). Recommended ME 3433, ME 3435, ME 3522, ME 3524.

ME4424Sustainable Energy Systems Design2 ch (1C 2L) [W]

Project oriented course dealing with the design of energy systems that meet regional and global energy needs in the 21st century in a sustainable manner. A combination of conventional and renewable energy technologies will be presented, including topics on resources, extraction, conversion, and end-use. The impact of engineering design on the environment, society, and sustainable development is discussed. Projects will focus on the improved design of both conventional and renewable energy systems with the aim of improving overall efficiency while minimizing the environmental and social impact. 

Prerequisites: Finish two out of these three sets (ME 2413 or ME 3413 ) +  (ME 3415 or ME 2415),  (ME 3433 + ME 3435), (ME 3522 + ME 3524). 

Co-requisite: ME 4421

ME4613Mechanical Vibration4 ch (3C 3L*)

Review of single degree-of-freedom vibration: free response, damping, forced response. Multiple-degree-of-freedom systems. Design for vibration suppression. Distributed parameter systems; wave propagation. Vibration testing and experimental modal analysis including transducers and FFT analysis. 

Prerequisites: ME 3613 and MATH 3503

ME4622*Human Factors Engineering 3 ch (2C 3L)

An interdisciplinary study of the interaction of humans and their workspace. Physiological principles of work and energy. Anthropometry. Biomechanics. The ergonomics of workspace and job design. Fatigue. Work/rest schedules and nutrition. The physiological and psychological effects of human noise, vibration, lighting, vision, and the workspace environment. Lab periods include seminars and practical design exercise applying human factors and ergonomic theory to workspace problems. 

Prerequisite: Restricted to students with at least 65 credit hours.

ME4673Introduction to Mechatronics4 ch (3C 2L)

Mechatronics is an integrated approach to mechanical, electronic and computer engineering for the design of “smart” products and “intelligent” manufacturing systems. Fundamentals of mechatronics design, with emphasis on product design and fabrication. Examples of mechanical systems utilizing sensors and actuator technologies, including use of signal conditioning circuits such as filters, amplifiers and analog-to-digital converters. Software design and implementation for process monitoring and logic control. Laboratory experiments give hands-on experience with components and equipment used in the design of mechatronic products. Project to design and fabricate a mechatronic system. 

Prerequisite: ECE 2213 or (ECE 2214 and ECE 2215) , ECE 3111 or EE3111 , ME 3341 , and ME 3613

ME4683Mechatronics Applications 4 ch (3C 2L)

Concepts in automating processes. Programmable logic controller (PLC) architecture, PLC programming with mathematical functions, and PLC interfacing. Microprocessor selection, programming and interfacing for system automation and control. Project involving use of PLC or microprocessor technology in a mechatronics system. 

Prerequisite: ME 4673

ME4703*Mechanical Engineering Measurements4 ch (3C 2L)
Discusses a variety of measurement techniques used in Mechanical Engineering.  Topics include analog and digital measurement systems, frequency response, calibration and assessment of uncertainty. The focus is on the analysis and design of measuring instruments.  Laboratory exercises include measures of time and rate, displacements, stress and strain, force, pressure, flow, temperature, and vibrations.Pre-requisites: ME 2111 and ME 3613 or permission from the instructor.
ME4860Senior Design Project8 ch(1C 2T 4L) [W]

A mechanical engineering design is developed and documented in the form of a technical report. Students normally work in approved teams. Industrial projects are developed in cooperation with industry and may require some period of time on site. University-based projects are developed in cooperation with university faculty. The first stage of this process involves definition of the project topic, background studies, and development of a conceptual design. An oral examination is conducted towards the end of the first term, and a written preliminary report is submitted. In the second term, a detailed design is prepared, the project is completed and orally examined, and a final report is submitted. One of the laboratory weekly hours is designated for a scheduled meeting with project advisor(s). Workshops involve practice exercises, relevant to student projects, on: problem definition and formulation, project planning, teamwork, information and communication; conceptual, parametric and configuration designs; and professional, environmental, social, human factors, and safety aspects of design.

Restricted to students who have completed at least 110 ch in their program. Prequisite: ME 3341 and ME 3345. Recommended prerequisite: ME 3524. Co-requisite: ME 4861. Prerequisite for Mechatronics Option students: ME 4673.

ME4861Mechanical Health and Safety1 ch (1C) [W]

Accidents, their effects and causation. Mechanical hazards and machine safeguarding . Temperature extremes. Pressure hazards. Fire hazards, Noise and vibration hazards. Computers, automation and robots. Ethics and safety.

Co-requisite: ME 4860 or ENGG 4025 or TME 5025.

ME5173*Advanced Kinematics of Manipulators4 ch (3C 3L*)

Various methods for solving the forward and inverse displacement problems are described. Particular emphasis is made on the use of screw theory for the derivation of the Jacobian matrix. The selection of alternate frames of reference for describing the Jacobian are also discussed. Methods used in the solution of the inverse displacement problem and the inverse and forward velocity problems for kinematically redundant manipulators are discussed. 

Prerequisite: ME 4173 . Recommended co-requisite: ME 2352

ME5183*Industrial Robotics and Automation4 ch (3C 2L*)
Brief introduction to robot kinematics including forward and inverse displacement and velocity solutions. An introduction to trajectory planning. Description of common uses of robotics in the manufacturing industry. Description and differences between soft and hard automation particularly in material handling systems. Fundamentals of sensors, actuators and controllers. Examples of automated machinery conveyor systems, feeder systems and packaging systems. Lab introduces different components of a flexible manufacturing systems. Graduate students enrolling in this course must submit an additional project in order to receive credit for this course.


Prerequisite: CS 1003, MATH 1503, ME 2143 and (ECE 2701 or ECE 2711).

ME5223*Finite Element Analysis3 ch (3C)

Introduction to the basic concepts of finite element analysis (FEA) including domain discretization, element types, system matrix assembly, and numerical solution techniques. Application of FEA to solve static, dynamic and harmonic problems of linearly elastic solid bodies and heat transfer will be covered in detail. Graduate students enrolling in this course must submit an additional project in order to receive credit for this course.

Prerequisites: ME 2122 and ME 3613 and MATH 3503 and (CS 3113  or CE 3933 or CHE 2418).

ME5243*Machining Theory and Practice4 ch (3C 3L)

The fundamentals of metal cutting theory will be examined with particular emphasis on understanding cutting forces, stresses, strains, strain rates, and temperatures during the cutting process. Tribological issues, tool wear, and tool life will also be presented. Tools typically available to the manufacturing engineer such as Computer-Aided Design (CAD), Computer Aided Manufacturing (CAM), and Computer Numerical Control (CNC) Programming will compromise a significant portion of the course. Using the machine shop in the Mechanical Engineering Department, students will extend classroom concepts to practical scenarios and situations on the machine shop floor.

Prerequisite: (ME 2222 or ME 3222 )

Co-requisite: ME 4283 .

ME5253*Codified Design and Failure Analysis4 ch (3C 3T*)
This senior level course examines the application of mechanical design to engineering practice. In particular, the course will examine codified design of steel structures and the analysis of common failures that occur in service.Prerequisite: ME 3341Corequisite: ME 4613
ME5283*Micro/Nano Manufacturing3 ch (3C)
Review of principles and practices of micro/nano fabrication technologies with research and industrial perspectives.  Introduction to micro/nano fabrication and its applications in MEMS/NEMS, renewable energy and biomaterials; materials selection; silicon processing; lithography process; thin film fabrication; advanced lithography process; characterization and micro/nano measurement techniques; atomic force microscopy and its applications.Prerequisite: CHE 2501 and ME3222 or ME 2222)
ME5353*Fracture Mechanics3 ch (3C)

Principles of fractures mechanics and fracture analysis of engineering structures. Plane elasticity and mathematical methods to determine the elastic stress, strain and displacement fields. Fracture criteria and their limitations. Elastic-plastic fracture mechanics, J integral and COD. Fatigue fracture and S-N curve. 

Prerequisite: ME 3341.

ME5373*Nuclear Reactor Engineering3 ch (3C)

Review of reactor systems. Neutronic design of equilibrium core. Fuel management. Reactor thermal hydraulics. Accident analysis and safety systems. (This course will not be offered every year. It will be a technical elective for chemical and mechanical engineering students, and is a designated elective in the Nuclear and Power Plant Engineering Option programs within mechanical and chemical engineering.)

Prerequisite: 90 credit hours completed in Mechanical or Chemical Engineering.

ME5473*Energy Management4 ch (3C, 2S)

Energy classification, sources, utilization, economics, and terminology. Principal fuels for energy conversion. Environmental impact analyses. Production of thermal energy, mechanical energy and electrical energy. Advanced and alternate energy systems. Energy storage. Energy audits. Energy management through control and usage strategies. 

Prerequisite: ME 3433 or equivalent. 

ME5493*Internal Combustion Engines4 ch (3C 3L*)

The thermodynamics of internal combustion engines is introduced and applied to reciprocating spark ignition and compression ignition engines. The performance of each engine type is studied experimentally. The mechanical design of reciprocating engines is also examined. 

Prerequisite: ME 3423 or ME 4421

ME5503*Application of Computational Fluid Dynamics to Industrial Processes 3 ch (3C)

General CFD topics such as grid topologies, discretization methods and errors, pressure-velocity coupling, solution methods for non-linear equations, and popular solution schemes such as the SIMPLE based methods. Introduction of extensions to core CFD techniques for a wide range of industrial applications, including turbulence models, multiphase flow models for problems in cavitation, boiling/condensation, and solidification/melting. Role of properties in CFD models, as related to non-Newtonian fluids, real and ideal properties for compressible flows, and combustion applications. 

Prerequisites: ME 3433 , ME 3522

ME5534*Experimental Methods in Fluid Dynamics4 ch (3C 3L*)

This course will cover topics including the methodology, measurement uncertainty, and signal processing associated with fluid dynamics measurements. Various means of measuring pressure, velocity and visualizing flow will also be discussed.

Prerequisites: ME 3511 , ME 3515

Co-requisite: ME 3522

ME5553*Ocean Wave Energy Conversion4 ch (3C 2L)

Introduction to the fundamental concepts of ocean wave energy conversion. Topics include: ocean wave mechanics, the wave energy resource, basic wave energy conversion techniques, analytical and experimental modelling of wave energy converter, power take-off systems, and environmental impact assessment. 

Prerequisites: ME 3613 and ME 3522

ME5578*Low Speed Aerodynamics4 ch (3C 1L)
Fluid mechanics principles will be applied to describe external flow of incompressible gasses and liquids.  Emphasis will be placed on techniques used to predict aerodynamic forces and moments on aircraft.  Applications include aerofoils of infinite span, wing of finite span, aerodynamic design considerations, and high lift devices.  Other applications include the aerodynamics of wind-turbines and submarine hydrodynamics.  An introduction to computational aerodynamics will also be given.


Prerequisite: ME 3522.

ME5588*High Speed Aerodynamics3 ch (3C)
The principles of thermodynamics and fluid mechanics will be applied to describe external flow of compressible gases. Applications include two dimensional aerofoils, slender wings, aircraft and ballistics.Prerequisite: ME 3522.
ME5643*Automatic Controls II 4 ch (3C 2L*)

The first half of the course is an introduction to digital control. Emphasis is placed on understanding the relationships between analog and digital techniques. The second half concentrates on developing the basic mathematical framework for state space control. Several powerful abstract mathematical tools such as the projection theorem are introduced.

Prerequisite: ME 3623 or ECE 3312 or EE 3312 . 

ME5653*Predictive Control and Intelligent Sensors4 ch (3C 3L*)

Study on the design and practical implementation of model predictive controllers and intelligent sensors for industrial type processes. Topics to be studied include sensor selection and instrumentation, signal processing and conditioning, process modelling and identification, computer interfacing, predictive control, optimization techniques, algorithm design and intelligent sensor modelling. The course is project oriented and includes the use of Matlab and LabWindows CVI software. 

Prerequisite: ME 3623 or CHE 4601 or ECE 3312 or EE 3312 . 

ME5713*Nondestructive Testing4 ch (3C 3L*)

Principles of nondestructive evaluation, acoustic emission techniques, ultrasonics, microwave methods, electromagnetic probes, penetrating radiation. 

Prerequisite: A first year course in Physics or APSC 1023 or ENGG 1082 . Restricted to students with at least 100 credit hours. 

ME5744*Steam Supply Systems (Cross-Listed: CHE 5754)4 ch (3C)

Historical and descriptive introduction to fossil fuel fired boilers. Coal firing systems. Introduction to different reactor types. Complex Rankine cycles. Steam plant efficiencies. Energy and exergy analysis. Heat transfer in fossil fuel fired boilers. Heat transfer in nuclear reactors. Thermal transport and steam generation. Steam plant heat exchangers. Analysis of real plant data. Laboratory work or special project related to plant systems or operational characteristics. 

Prerequisites: ME 2413 or ME 3413 or CHE 2012 and at least 70 ch of program credit hours completed. Recommended: (ME 2415 or ME 3415), ME 3511, ME 3515.

ME5754*Steam and Gas Turbines (Cross-Listed: CHE 5754)4 ch (3C)

Development of steam turbines and review of steam cycles. Turbine thermodynamics and energy conversion. Impulse and reaction blading. Mechanical configuration of turbine components and operational considerations. Efficiency calculations. Past load operations. Review of Gas cycles. Steam turbine governing and operational modes. Operational constraints and thermal effects. Turbine auxiliary systems. 

Prerequisite: ME 2413 or ME 3413  or CHE 2012 and at least 70ch of program credit hours completed. Recommended: (ME 2515 or ME 3415), ME 3511, ME 3515. 

ME5813*Special Topics in Mechanical Engineering1 ch

Provides selected students an opportunity to complete an independent project in association with an undergraduate course within the department. Permission of both the instructor of the associated course and the director of undergraduate studies is required. Students may register for this course only once during their degree.

ME5833*Special Topics in Mechanical Engineering3 ch

Provides selected students an opportunity to complete an independent or group-based course of study within the department. Permission of both the instructor of an associated course and the director of undergraduate studies is required. Students may register for this course only once during their degree.

ME5834*Nuclear Engineering (Cross-Listed: CHE 5834)3 ch (3C)

Radio active decay, fission energy, nuclear interactions, neutron scattering, and absorption. Neutron diffusion elementary reactor theory, four and six factor formulae. Neutron flux variation. Reactor kinetics, source multiplication, decay heat, reactor start-up and shut down. Fuel burnup, fission product poisoning, refuelling. Temperature and void effects on reactivity, reactor control. Fuel handling and waste disposal. This course is intended for senior level students.  

Prerequisites: (ME 2413 or CHE 2012 or ME 3413) ; CHE 2703 or ME 3511.

ME5913*Biomechanics I4 ch (3C 2S)

A number of topics in biomechanics are examined. Of particular interest is the mechanics of joints, and relation of the internal mechanics of joints to externally applied loads. Analysis techniques are introduced to facilitate analysis of the problems addressed in the course. 

Prerequisite: 100 credit hours.

ME5933*Industrial Ecology and Sustainable Engineering 3 ch (3C)
The goal is to develop awareness and knowledge on forward-looking thinking of interaction of technology with human induced transformation of materials and energy from the perspectives of environment and sustainability. Topics include: humanity and technology; concept of sustainability; key questions of industrial ecology and sustainable engineering; status of resources; technology and risk assessment; introduction to life cycle assessment (LCA); LCA impact assessment and interpretation; streamlining the LCA process.

Prerequisite: Available to all students across engineering disciplines who have completed at least 100 credit hours in their engineering programme. 

ME5122*Advanced Solid Mechanics3 ch (3C)
Introduction to stress analysis that deals with anisotropy of stress and general equations of the theory and elasticity. The elastic equilibrium and boundary value problem formulations are considered. Introduction to the modelling of inhomogeneous composite solids, the effective nanostructured composite theories are covered.Prerequisites: ME 2122, ME 3222, and MATH 2513.
ME5233*Metal Forming Analysis3 ch (3C)
Mechanical and metallurgical analysis of different metal forming processes such as forging, rolling, extrusion, deep drawing, wire drawing along with sheet metal forming analysis and forming limit diagram calculation.Prerequisites: ME 3341 and ME 4283.
ME3222Manufacturing Engineering I4 ch (3C 2L* 1T*)
Introduction to manufacturing processes; design criteria for material and process selections. Fundamentals of mechanical behaviour of materials, particularly the yield behaviour under triaxal stresses. Crystal structures; failure modes and the effect of various factors; manufacturing properties of metals. Surface structures and properties; service texture and roughness; friction, wear, and basic lubricationl surface treatment design. Metal casting processes and equipment; casting design; heat treatment design. The laboratory exercises are: heat treatment, precipitation stregthening, Jominy centrifugal testing casting and impact toughness test.Prerequisite: CHE 2501, CHE 2506, and ME 2111.
ME2413Thermodynamics3 ch (3C 1T)
Properties of a pure substance -- work and heat. First law and applications in non-flow and flow processes. Second law and reversibility: entropy, applications of the second law to non-flow and flow processes. Analysis of thermodynamic cycles: Otto and Diesel cycles. Thermodynamic relationships.Prerequisites: CHEM 1982, MATH 1013.Co-requisite: MATH 2513.
ME2415Thermodynamics Laboratory1 ch (3L*) [W]
Laboratory experiments and measurements related to Thermodynamics 1. Laboratory reports and readings are assigned.Co-requisite: ME 3413 or ME 2413.